Before & After:
Real West LA Garages

Every project below was installed by our crew in Playa Vista, Westchester, Marina del Rey, El Segundo, Playa del Rey, and Culver City. Same-day installs. Same crews. Same results.

Before
After
Full-Flake Epoxy
Playa Vista 2-Car Garage
Bare concrete slab with oil staining near garage door. Full diamond grind, stain-blocking primer, gray/white flake broadcast, polyaspartic topcoat. Completed in one day.
~420 sq ft 1 Day Gray/White Flake
Before
After
Metallic Epoxy
Westchester Tandem Garage
Old latex paint removed, two hairline cracks repaired with polyurea injection. Antique bronze metallic system with swirling technique. High-gloss UV-stable topcoat. Owner uses it as a home studio.
~580 sq ft 2 Days Bronze Metallic
Before
After
Polyaspartic · Coastal
Marina del Rey Condo Garage
Below-grade condo garage with elevated moisture vapor emission. Full MVER primer applied before coating. 100% polyaspartic system for maximum coastal durability. HOA COI and low-VOC products required by building management.
~310 sq ft 1 Day Slate Blue HOA Compliant
Before
After
Full-Flake Epoxy
El Segundo 3-Car Garage
Large 3-car garage with a previous DIY epoxy coat that had delaminated in patches. Entire floor mechanically ground and cleaned before recoating. Custom midnight green flake blend — owner's choice to match the house trim. One of our favorite results.
~650 sq ft 1 Day Custom Green Flake
Before
After
Polyaspartic · Solid Color
Playa del Rey Townhome
Single-car attached garage in a beach-adjacent townhome. Owner wanted a clean, modern look — solid charcoal with a matte finish rather than the typical glossy flake. Polyaspartic for UV stability. Anti-slip additive applied per HOA requirement. Back in use the same evening.
~220 sq ft 4 Hours Charcoal Matte
Before
After
Metallic Epoxy · Gym
Culver City Garage → Home Gym
Garage-to-gym conversion. Client wanted a showroom floor to match new rubber gym flooring around the perimeter. Champagne gold metallic swirl system, high-gloss polyaspartic topcoat. The reflectivity makes the space look twice as large.
~440 sq ft 2 Days Champagne Gold

Every Project Includes
the Same Standard

The quality you see in the gallery above comes from a non-negotiable install process. Here's what happens on every job, start to finish.

01

Diamond Grind Prep

We grind every square inch of the slab with HEPA-filtered equipment. This opens the pores for maximum adhesion — the single most important step in a lasting install. We never acid-etch or skip the grind.

02

Moisture Test

We test for moisture vapor emission before any product touches the slab. Coastal garages in Marina del Rey and Playa del Rey often have elevated readings. If moisture is present, we address it at this stage — not after the floor peels.

03

100% Solids Primer

Our primer is 100% solids — meaning it contains no water or solvents that evaporate and leave pinholes. It saturates the slab and creates the bonding layer the topcoats adhere to. This is where most DIY kits fail.

04

Broadcast + Build Coats

Flakes, metallic pigments, or solid color are applied in the broadcast coat. We apply a build coat over the broadcast to lock in the aggregate, level the surface, and create the foundation for the topcoat.

05

UV-Stable Topcoat

Our standard topcoat is a UV-stable aliphatic urethane or polyaspartic. It seals the surface, provides chemical and abrasion resistance, and is the layer you're actually driving on. It won't yellow from California sun — even in garages with afternoon west exposure.

06

Cleanup + Walkthrough

We remove all equipment, clean up overspray, and do a final walkthrough with you before we leave. You get a written care guide, warranty documentation, and our direct line if you have any questions in the first year.

West LA Homeowners
on the Results

★★★★★

"Completely transformed my garage. The full-flake system looks better than I imagined and they were done before noon. The before photo I took that morning looks like a completely different building."

— Playa Vista Homeowner
★★★★★

"I was nervous about a condo install — my building's HOA is strict about contractors. These guys had all the paperwork ready before I even asked. Low-VOC product, covered the elevator, left the hallway cleaner than they found it."

— Marina del Rey Condo Owner
★★★★★

"I picked the metallic swirl system and I'm still staring at it three months later. Worth every dollar. The pictures don't do it justice — the depth and the reflection are something you have to see in person."

— Westchester Homeowner

Your Garage Could Be Next

Free on-site estimate. Same-week availability. Written quote included. No pressure, no obligation.

Call (323) 380-0344 Request Estimate Online