The most popular garage floor finish in West LA — and for good reason. Here's everything you need to know before you commit to a color.
A decorative flake epoxy floor embeds colored vinyl chips into a wet epoxy base coat, then seals them under a clear polyaspartic topcoat. It costs $1,095–$1,800 for a 2-car garage in West LA, lasts 15–20 years, and is available in 20+ color blends. It's the most popular garage floor finish we install. See real before & after photos → See real before & after photos →
Walk into almost any upgraded garage in Playa Vista, Westchester, or Mar Vista and you'll see the same finish: a clean, speckled floor in a neutral gray or charcoal blend that looks like it belongs in a showroom. That's a full-broadcast decorative flake epoxy system — and it's by far the most popular garage floor coating we install throughout West LA.
Here's a complete guide to what the flake system is, why it works, what colors are available, and what it actually costs to have one installed.
A decorative flake epoxy floor is a multi-layer coating system that uses colored vinyl flake chips as the decorative element. The installation process works like this: after diamond grinding the concrete, a 100% solids epoxy base coat is applied to the slab. While the epoxy is still wet, vinyl flake chips are broadcast across the surface — either partially or at full broadcast (edge to edge, full coverage). Once cured, the excess flake is scraped and the surface is sealed with a UV-stable polyaspartic topcoat, locking the flake permanently in place.
The result is a durable, attractive surface with several practical advantages over solid-color coatings:
Decorative vinyl flake is available in 20+ standard color blends. The most popular choices in West LA's design-forward neighborhoods tend toward neutral, modern palettes:
| Blend Category | Description | Best For |
|---|---|---|
| Medium Gray | Mixed gray, white, and black chips — classic, versatile | Most garages; hides everything |
| Slate Charcoal | Dark gray dominant with black accents — bold, modern | Contemporary homes, home gyms |
| Sand/Tan | Warm beige and brown tones — softer look | Coastal homes, warmer interiors |
| Griege | Gray-beige hybrid — transitional, popular in Playa Vista | New construction, open-plan homes |
| Blue Blend | Blue, gray, and white mix — distinctive | Car enthusiasts, accent spaces |
| Custom | Any combination of chip colors and sizes | Specific design requirements |
Flake chips also come in different sizes — 1/4 inch is standard, 1/8 inch creates a finer pattern, and larger chips (3/8 inch or mixed) create a more dramatic look. We bring physical samples to every estimate so you can see the colors in your actual garage light before committing.
The term "full broadcast" means the flake is applied edge to edge at maximum density, completely covering the epoxy base. This creates the most uniform, finished look and the highest flake density. It's what you see in professional installations and what we use on all standard jobs.
Partial broadcast (also called scatter broadcast) applies flake at lower density, leaving some of the base coat visible. It creates a different aesthetic — some homeowners prefer it for a more subtle effect — but it's less common in West LA's market. If you're curious about the look, we can show you examples at your estimate.
| Garage Size | Full-Broadcast Flake System |
|---|---|
| 1-car (~200 sq ft) | $695–$995 |
| 2-car (~400–500 sq ft) | $1,095–$1,800 |
| 3-car (~600+ sq ft) | $1,800–$2,800+ |
All pricing includes diamond grinding, full-broadcast flake application, and a UV-stable polyaspartic topcoat. There are no add-on charges for the flake or topcoat — it's a complete system. For full pricing detail by garage size and coating type, see: Epoxy Garage Floor Cost in Los Angeles.
A professionally installed full-broadcast flake system with a polyaspartic topcoat typically lasts 15–20 years in a residential West LA garage. The flake is permanently encapsulated under the topcoat and does not fade or degrade with normal use. The polyaspartic layer is 100% UV-stable, which matters in Southern California where direct sun exposure accelerates degradation of lesser coatings. For more detail on service life and maintenance, see: How Long Does an Epoxy Garage Floor Last?
We bring physical flake samples to every estimate. See exactly how your color looks in your space before you decide. Serving all of West LA.
Call (323) 380-0344A decorative flake epoxy floor embeds colored vinyl chip flakes into a wet epoxy base coat, then seals them under a clear polyaspartic topcoat. The result is a speckled, multi-tone surface that conceals dirt and scuffs while providing a polished, professional appearance.
A full-broadcast decorative flake system for a 2-car garage runs $1,095–$1,800 installed in West LA. The price includes diamond grinding, flake, and polyaspartic topcoat — no hidden add-ons.
15–20 years with normal residential use. The flake is encapsulated under the polyaspartic topcoat and does not fade, peel, or degrade from UV exposure.
No. The broadcast flake layer creates a textured surface profile that provides grip. The polyaspartic topcoat can be finished in matte, satin, or gloss depending on your preference and how much slip resistance you need.
Yes — we bring physical flake samples to every free estimate so you can see exactly how the color looks in your garage's lighting before any decision is made.
Yes — we serve Playa Vista, Westchester, El Segundo, Marina del Rey, Playa del Rey, Mar Vista, and Culver City.
Free estimate · Physical samples on-site · Same-week scheduling across West LA
Call (323) 380-0344